You copied the Doc URL to your clipboard.

C.2. Installing the CLCD display

To install the CLCD display:

  1. Connect one end of the CLCD expansion cable to the CLCD adaptor board.

  2. Connect the other end of the cable to the PB926EJ-S CLCD expansion connector on the enclosure.

  3. If required, program the CLCD control registers SYS_CLCD and SYS_CLCDSER to sequence the power to the LCD display and specify the bit format. See the CLCDC interface.

Figure C.5. CLCD adaptor board connection

Figure C.5. CLCD adaptor board connection

Was this page helpful? Yes No