You copied the Doc URL to your clipboard.

1.3.1. Ensuring safety

The PB926EJ-S can be powered from one of the following sources:

  • the supplied power supply connected to J35

  • a bench power supply connected to the screw terminals on header J34

  • an external PCI bus.


Do not supply more than one power source. If you are using the baseboard with the PCI enclosure for example, do not connect a power source to J35 or J34.

To avoid a safety hazard, only connect Safety Extra Low Voltage (SELV) equipment to the connectors on the PB926EJ-S.

Was this page helpful? Yes No