You copied the Doc URL to your clipboard.

1.3.2. Preventing damage

The PB926EJ-S is intended for use in a laboratory or engineering development environment. If operated without an enclosure, the board is sensitive to electrostatic discharges and generates electromagnetic emissions.

To avoid damage to the board, observe the following precautions.

  • never subject the board to high electrostatic potentials

  • always wear a grounding strap when handling the board

  • only hold the board by the edges

  • avoid touching the component pins or any other metallic element

  • do not connect more than one power source to the platform

  • always power down the board when connecting RealView Logic Tiles or expansion boards.

Do not use the board near equipment that is:

  • sensitive to electromagnetic emissions (such as medical equipment)

  • a transmitter of electromagnetic emissions.

Was this page helpful? Yes No