You copied the Doc URL to your clipboard.

3.1.3. Launching Model Debugger separately

Any model that has a CADI interface can be debugged with Model Debugger. You can connect to remote System Generator or SystemC model simulations.

  1. Start your model, for example using Model Shell with a CADI server enabled.

  2. Launch Model Debugger.

  3. Select Connect to Model from the Model Debugger File menu to display the Connect Remote dialog shown in Figure 3.6. Select and then click Connect to connect to the simulation.

    Connect remote dialog

  4. Select a target, for example, the processor Core as shown in Figure 3.7, and click Connect to connect to the specific component instance in the simulation. If you select more than one instance, one Model Debugger window is opened for each component. Click OK to close the dialog.

    Select Target dialog

  5. If the source code is not automatically displayed, select Load Application Code from the File menu. Select the application image from the Load Application dialog and click Open.


    If the application is loaded and the source code can be found from the debug information in the application file, Model Debugger displays the code in the source window.

Was this page helpful? Yes No