You copied the Doc URL to your clipboard.

Chapter 4. Programmer’s Reference

This chapter describes the memory map and the configuration registers for the peripherals in the baseboard FPGA. It contains the following sections:

For detailed information on the programming interface for the ARM PrimeCells or other ARM IP, see the appropriate technical reference manual. For the DMA channels, interrupt signals, release versions, and any modifications made to the standard part, see the section of this chapter that describes the peripheral or controller.


The peripherals and controllers implemented in the Southbridge are in the standard images distributed by ARM on the Versatile Family CD.

ARM do not recommend or support replacing the ARM IP peripherals and controllers implemented in the Southbridge with your own custom designs.

Custom IP development should be done using an attached Logic Tile for which ARM support is provided.

Was this page helpful? Yes No