You copied the Doc URL to your clipboard.

2.4. Baseboard configuration switches

Note

For normal operation, it is not necessary to open the ATX enclosure and change the baseboard configuration switch bank (S7) settings. The default setting is all switches OFF.

The location of the configuration switch bank (S7) on the baseboard is shown in Figure 3.1.

The switch settings determine at power up:

  • boot memory configuration

  • Flash recovery mode

  • Level 2 cache fix is enabled (and Level 2 cache is not bypassed)

  • number of master ports available from the ARM11 MPCore.

Was this page helpful? Yes No