Generates code that is compatible with multiple target architectures or processors.
is the name of a target processor or architecture, or None.
Processor and architecture names are not case-sensitive.
Specifying None generates code only for the processor or architecture specified by --cpu.
If multiple instances of this option are present on the command line, the last one specified overrides the previous instances. Specify --compatible=None at the end of the command line to turn off all other instances of the option.
The default is None.
Using this option avoids having to recompile the same source code for different targets.
See the following table. The valid combinations are:
--cpu=CPU_from_group1 --compatible=CPU_from_group2 .
--cpu=CPU_from_group2 --compatible=CPU_from_group1 .
|Group 1||ARM7TDMI, 4T|
|Group 2||Cortex-M0, Cortex-M1, Cortex-M3, Cortex-M4, 7-M, 6-M, 6S-M, SC300, SC000|
No other combinations are permitted.
The effect is to generate code that is compatible with both --cpu and --compatible. This means that only 16-bit Thumb instructions are used. (This is the intersection of the capabilities of group 1 and group 2.)
Although the generated code is compatible with multiple targets, this code might be less efficient than compiling for a single target processor or architecture.
This example generates code that is compatible with both the ARM7TDMI processor and the Cortex-M4 processor.
armcc --cpu=arm7tdmi --compatible=cortex-m4 myprog.c