Signed Multiply, with 16-bit operands and a 32-bit result and accumulator.
is either B or T. B means use the bottom half (bits [15:0]) of Rn, T means use the top half (bits [31:16]) of Rn.
is either B or T. B means use the bottom half (bits [15:0]) of Rm, T means use the top half (bits [31:16]) of Rm.
is an optional condition code.
is the destination register.
- Rn, Rm
are the registers holding the values to be multiplied.
is the register holding the value to be added.
SMULxy multiplies the 16-bit signed integers from the selected halves of
Rn and Rm, and places the 32-bit result in
You cannot use PC for any register.
You can use SP in ARM instructions but this is deprecated in ARMv6T2 and above. You cannot use SP in Thumb instructions.
These instructions do not affect the N, Z, C, or V flags.
This ARM instruction is available in ARMv6 and above, and E variants of ARMv5T.
This 32-bit Thumb instruction is available in ARMv6T2 and above. For the ARMv7-M architecture, it is only available in an ARMv7E-M implementation.
There is no 16-bit version of this instruction in Thumb.
SMULTBEQ r8, r7, r9