Unsigned Long Multiply, with optional Accumulate, with 32-bit operands and 64-bit result and accumulator.
is an optional suffix available in ARM state only. If S is specified, the condition flags are updated based on the result of the operation.
is an optional condition code.
are the destination registers. They also hold the accumulating value.
RdHimust be different registers.
are ARM registers holding the operands.
UMLAL instruction interprets the values from
Rm as unsigned integers. It multiplies these integers, and adds the
64-bit result to the 64-bit unsigned integer contained in
Rn must be different from
architectures before ARMv6.
You cannot use PC for any register.
You can use SP in ARM instructions but this is deprecated in ARMv6T2 and above. You cannot use SP in Thumb instructions.
If S is specified, this instruction:
Updates the N and Z flags according to the result.
Does not affect the C or V flags.
This ARM instruction is available in all versions of the ARM architecture.
This 32-bit Thumb instruction is available in ARMv6T2 and above.
There is no 16-bit version of this instruction in Thumb.
UMLALS r4, r5, r3, r8