You copied the Doc URL to your clipboard.

Target connection issues

Each of the error messages provided by Streamline on a connection failure indicates a different issue:

Symptom

You receive the following error message: Unable to connect to the gator daemon at your_target_address. Please verify you have installed the gator daemon on your target and it is running. Installation instructions can be found in: DS-5 root/arm/README_Streamline.txt

Solutions: Make sure the Gator daemon is running on your target. Enter the following command in the shell of your target:

ps -d | grep gatord

If this command returns no results, gatord is not active. Start it by navigating to the directory that contains gatord and entering the following command:

sudo ./gatord &

Try connecting to the target again.

If gatord is active and you still receive this error message, try disabling any firewalls on your host machine that might be interfering with communication between it and the target.

Symptom

You receive the following error message: Unknown host

Solution: Make sure that you have correctly entered the name or IP address of the target in Address field. If you have entered a name, try an IP address instead.

Symptom

You receive the following error message: Unable to launch. Only one instance of Streamline may be running on this machine. Please close all instances of Eclipse and try again.

Solution: Stop any other running Streamline session and try connecting to the target again. If you cannot find another session, try closing Eclipse for DS-5, then re-starting it.

Was this page helpful? Yes No