You copied the Doc URL to your clipboard.

ARM Streamline Data view basics

Much of the functionality of ARM Streamline requires the ARM Streamline Data view. To open the ARM Streamline Data view:

  1. Select Window ? Show View ? Other...

  2. Expand the ARM Streamline group.

  3. Select ARM Streamline Data.

Figure 1. The ARM Streamline Data view

The ARM Streamline Data view

Streamline Capture Data and Streamline Analysis Reports

If you have successfully captured data on your target, the ARM Streamline Data view contains two resource types. Streamline Capture Data has a .apc extension and contains all of the raw data collected on the target during a capture session. Streamline Analysis Reports have a .apd extension and are created on the host from the information contained in the Streamline Capture Data.

Note

Streamline Analysis Reports files are not compatible across different versions of Streamline, but the same is not true of Streamline Capture Data. If an upgrade to Streamline renders a Streamline Analysis Report incompatible, double-click on the Streamline Capture Data resource to re-run it and create a new, compatible Streamline Analysis Report.

Stopping a capture session manually

You can use the Capture Options dialog box to set a specific capture session length, but if you want to control the length of the session yourself, you can use the Streamline data view to terminate it manually. To do so, click the Stop button that appears on the left in the new capture file.

Figure 2. From working Streamline Capture Data to Streamline Analysis Report

From working Streamline Capture Data to Streamline Analysis ReportFrom working Streamline Capture Data to Streamline Analysis ReportFrom working Streamline Capture Data to Streamline Analysis Report

Was this page helpful? Yes No