You copied the Doc URL to your clipboard.

I/O diagrams

The pin I/O circuit diagrams for the debug and trace connectors on the DSTREAM probe are:

Diagram A - Input

The input circuit diagram is shown in the following figure:

Figure 20. Input

Figure 20. Input

Diagram B - Output

The output circuit diagram is shown in the following figure:

Figure 21. Output

Figure 21. Output

Diagram C - Input/Output

The input/output circuit diagram is shown in the following figure:

Figure 22. Input/Output

Figure 22. Input/Output

Diagram D - Reset output

The reset output circuit diagram is shown in the following figure:

Figure 23. Reset output

Figure 23. Reset output

Diagram E - Reset output with feedback

The reset output with feedback circuit diagram is shown in the following figure:

Figure 24. Reset output with feedback

Figure 24. Reset output with feedback

Diagram F - VTRef input

The VTRef input circuit diagram is shown in the following figure:

Figure 25. VTRef input

Figure 25. VTRef input

Diagram G - VTRef input (decoupled)

The VTRef input (decoupled) circuit diagram is shown in the following figure:

Figure 26. VTRef input (decoupled)

Figure 26. VTRef input (decoupled)

Diagram H - Ground

The Ground circuit diagram is shown in the following figure:

Figure 27. Ground

Figure 27. Ground

Diagram I - AC Ground

The AC Ground circuit diagram is shown in the following figure:

Figure 28. AC Ground

Figure 28. AC Ground

Was this page helpful? Yes No