You copied the Doc URL to your clipboard.

LDR, unprivileged

Unprivileged load byte, halfword, or word.

Syntax

LDR{type}T{cond} Rt, [Rn {, #offset}] ; immediate offset (32-bit T32 encoding only)

LDR{type}T{cond} Rt, [Rn] {, #offset} ; post-indexed (A32 only)

LDR{type}T{cond} Rt, [Rn], ±Rm {, shift} ; post-indexed (register) (A32 only)

where:

type

can be any one of:

B

unsigned Byte (Zero extend to 32 bits on loads.)

SB

signed Byte (Sign extend to 32 bits.)

H

unsigned Halfword (Zero extend to 32 bits on loads.)

SH

signed Halfword (Sign extend to 32 bits.)

-

omitted, for Word.

cond

is an optional condition code.

Rt

is the register to load.

Rn

is the register on which the memory address is based.

offset

is an offset. If offset is omitted, the address is the value in Rn.

Rm

is a register containing a value to be used as the offset. Rm must not be PC.

shift

is an optional shift.

Operation

When these instructions are executed by privileged software, they access memory with the same restrictions as they would have if they were executed by unprivileged software.

When executed by unprivileged software these instructions behave in exactly the same way as the corresponding load instruction, for example LDRSBT behaves in the same way as LDRSB.

Offset ranges and architectures

The following table shows the ranges of offsets and availability of these instructions.

Table 13-14 Offsets and architectures, LDR (User mode)

Instruction Immediate offset Post-indexed +/-Rm a shift
A32, word or byte Not available -4095 to 4095 +/-Rm LSL #0-31
        LSR #1-32
        ASR #1-32
        ROR #1-31
        RRX
A32, signed byte, halfword, or signed halfword Not available -255 to 255 +/-Rm Not available
T32, 32-bit encoding, word, halfword, signed halfword, byte, or signed byte to 255 Not available Not available

Related reference

a 

You can use -Rm, +Rm, or Rm.

Was this page helpful? Yes No