Zero extend Byte and Add.
is an optional condition code.
is the destination register.
is the register holding the number to add.
is the register holding the value to extend.
is one of:
is rotated right 8 bits.
is rotated right 16 bits.
is rotated right 24 bits.
is omitted, no rotation is performed.
UXTAB extends an 8-bit value to a 32-bit value. It does this by:
Rotating the value from
right by 0, 8, 16 or 24 bits.
Extracting bits[7:0] from the value obtained.
Zero extending to 32 bits.
Adding the value from
You cannot use PC for any operand.
You can use SP in A32 instructions but this is deprecated. You cannot use SP in T32 instructions.
This instruction does not change the flags.
The 32-bit instruction is available in A32 and T32.
There is no 16-bit version of this instruction in T32.