LDCLRAB, LDCLRALB, LDCLRB, LDCLRLB
Atomic bit clear on byte in memory.
Xn|SP] ; Acquire general registers
Xn|SP] ; Acquire and release general registers
Xn|SP] ; No memory ordering general registers
Xn|SP] ; Release general registers
- Is the 32-bit name of the general-purpose register holding the data value to be operated on with the contents of the memory location.
- Is the 32-bit name of the general-purpose register to be loaded.
- Is the 64-bit name of the general-purpose base register or stack pointer.
Supported in ARMv8.1 and later.
Atomic bit clear on byte in memory atomically loads an 8-bit byte from memory, performs a bitwise AND with the complement of the value held in a register on it, and stores the result back to memory. The value initially loaded from memory is returned in the destination register.
- If the destination register is not
LDCLRALBload from memory with acquire semantics.
LDCLRALBstore to memory with release semantics.
LDCLRBhas no memory ordering requirements.
For more information about memory ordering semantics see Load-Acquire, Store-Release in the ARMv8-A Architecture Reference Manual.
For information about memory accesses see Load/Store addressing modes in the ARMv8-A Architecture Reference Manual.