You copied the Doc URL to your clipboard.

Extension register bank mapping for Advanced SIMD in AArch32 state

The Advanced SIMD extension register bank is a collection of registers that can be accessed as either 64-bit or 128-bit registers.

Advanced SIMD and floating-point instructions use the same extension register bank, and is distinct from the ARM register bank.

The following figure shows the views of the extension register bank, and the overlap between the different size registers. For example, the 128-bit register Q0 is an alias for two consecutive 64-bit registers D0 and D1. The 128-bit register Q8 is an alias for 2 consecutive 64-bit registers D16 and D17.

Figure 9-1 Extension register bank for Advanced SIMD in AArch32 state


Note

If your processor supports both Advanced SIMD and floating-point, all the Advanced SIMD registers overlap with the floating-point registers.

The aliased views enable half-precision, single-precision, and double-precision values, and Advanced SIMD vectors to coexist in different non-overlapped registers at the same time.

You can also use the same overlapped registers to store half-precision, single-precision, and double-precision values, and Advanced SIMD vectors at different times.

Do not attempt to use overlapped 64-bit and 128-bit registers at the same time because it creates meaningless results.

The mapping between the registers is as follows:

  • D<2n> maps to the least significant half of Q<n>
  • D<2n+1> maps to the most significant half of Q<n>.

For example, you can access the least significant half of the elements of a vector in Q6 by referring to D12, and the most significant half of the elements by referring to D13.

Was this page helpful? Yes No