Reverse the byte order in a word.
is an optional condition code.
is the destination register.
is the register holding the operand.
You can use this instruction to change endianness.
32-bit big-endian data into little-endian data or 32-bit little-endian
data into big-endian data.
You cannot use PC for any register.
You can use SP in the A32 instruction but this is deprecated. You cannot use SP in the T32 instruction.
This instruction does not change the flags.
The following form of this instruction is available in T32 code, and is a 16-bit instruction:
must both be Lo registers.
This instruction is available in A32 and T32.
REV r3, r7