You copied the Doc URL to your clipboard.

MOV32 pseudo-instruction

Load a register with either a 32-bit immediate value or any address.

Syntax

MOV32{cond} Rd, expr

where:

cond
is an optional condition code.
Rd
is the register to be loaded. Rd must not be SP or PC.
expr

can be any one of the following:

symbol
A label in this or another program area.
#constant
Any 32-bit immediate value.
symbol + constant
A label plus a 32-bit immediate value.

Usage

MOV32 always generates two 32-bit instructions, a MOV, MOVT pair. This enables you to load any 32-bit immediate, or to access the whole 32-bit address space.

The main purposes of the MOV32 pseudo-instruction are:

  • To generate literal constants when an immediate value cannot be generated in a single instruction.
  • To load a PC-relative or external address into a register. The address remains valid regardless of where the linker places the ELF section containing the MOV32.

    Note

    An address loaded in this way is fixed at link time, so the code is not position-independent.

MOV32 sets the T32 bit (bit 0) of the address if the label referenced is in T32 code.

Architectures

This pseudo-instruction is available in A32 and T32.

Examples

     MOV32 r3, #0xABCDEF12  ; loads 0xABCDEF12 into R3
     MOV32 r1, Trigger+12   ; loads the address that is 12 bytes 
                            ; higher than the address Trigger into R1
Was this page helpful? Yes No