You copied the Doc URL to your clipboard.

FMLA (vector)

Floating-point fused Multiply-Add to accumulator (vector).

Syntax

FMLA Vd.T, Vn.T, Vm.T

Where:

T

Is an arrangement specifier:

Half-precision
Can be one of 4H or 8H.
Single-precision and double-precision
Can be one of 2S, 4S or 2D.
Vd
Is the name of the SIMD and FP destination register.
Vn
Is the name of the first SIMD and FP source register.
Vm
Is the name of the second SIMD and FP source register.

Architectures supported (vector)

Supported in the Arm®v8.2 architecture and later.

Usage

Floating-point fused Multiply-Add to accumulator (vector). This instruction multiplies corresponding floating-point values in the vectors in the two source SIMD and FP registers, adds the product to the corresponding vector element of the destination SIMD and FP register, and writes the result to the destination SIMD and FP register.

This instruction can generate a floating-point exception. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR, or a synchronous exception being generated. For more information, see Floating-point exception traps in the Arm® Architecture Reference Manual Arm®v8, for Arm®v8‑A architecture profile.

Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.

Was this page helpful? Yes No