You copied the Doc URL to your clipboard.

UABDL, UABDL2 (vector)

Unsigned Absolute Difference Long.

Syntax

UABDL{2} Vd.Ta, Vn.Tb, Vm.Tb

Where:

2
Is the second and upper half specifier. If present it causes the operation to be performed on the upper 64 bits of the registers holding the narrower elements. See <Q> in the Usage table.
Vd
Is the name of the SIMD and FP destination register.
Ta
Is an arrangement specifier, and can be one of the values shown in Usage.
Vn
Is the name of the first SIMD and FP source register.
Tb
Is an arrangement specifier, and can be one of the values shown in Usage.
Vm
Is the name of the second SIMD and FP source register.

Usage

Unsigned Absolute Difference Long. This instruction subtracts the vector elements in the lower or upper half of the second source SIMD and FP register from the corresponding vector elements of the first source SIMD and FP register, places the absolute value of the result into a vector, and writes the vector to the destination SIMD and FP register. The destination vector elements are twice as long as the source vector elements. All the values in this instruction are unsigned integer values.

The UABDL instruction extracts each source vector from the lower half of each source register, while the UABDL2 instruction extracts each source vector from the upper half of each source register.

Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.

The following table shows the valid specifier combinations:

Table 20-86 UABDL, UABDL2 (Vector) specifier combinations

<Q> Ta Tb
- 8H 8B
2 8H 16B
- 4S 4H
2 4S 8H
- 2D 2S
2 2D 4S
Was this page helpful? Yes No