You copied the Doc URL to your clipboard.

NEG (shifted register)

Negate.

This instruction is an alias of SUB (shifted register).

Syntax

NEG  Wd, Wm{, shift #amount}    ; 32-bit general registers

Equivalent to SUB Wd, WZR, Wm {, shift #amount}

NEG  Xd, Xm{, shift #amount}    ; 64-bit general registers

Equivalent to SUB Xd, XZR, Xm {, shift #amount}

Where:

Wd

Is the 32-bit name of the general-purpose destination register, in the range 0 to 31.

Wm

Is the 32-bit name of the general-purpose source register, in the range 0 to 31.

amount

The value depends on the instruction variant:

32-bit general registers

Is the shift amount, in the range 0 to 31, defaulting to 0.

64-bit general registers

Is the shift amount, in the range 0 to 63, defaulting to 0.

Xd

Is the 64-bit name of the general-purpose destination register, in the range 0 to 31.

Xm

Is the 64-bit name of the general-purpose source register, in the range 0 to 31.

shift

Is the optional shift type to be applied to the second source operand, defaulting to LSL, and can be one of LSL, LSR, or ASR.

Was this page helpful? Yes No