You copied the Doc URL to your clipboard.

NEGS

Negate, setting the condition flags.

This instruction is an alias of SUBS (shifted register).

Syntax

NEGS  Wd, Wm{, shift #amount}    ; 32-bit general registers

Equivalent to SUBS Wd, WZR, Wm {, shift #amount}

NEGS  Xd, Xm{, shift #amount}    ; 64-bit general registers

Equivalent to SUBS Xd, XZR, Xm {, shift #amount}

Where:

Wd

Is the 32-bit name of the general-purpose destination register, in the range 0 to 31.

Wm

Is the 32-bit name of the general-purpose source register, in the range 0 to 31.

amount

The value depends on the instruction variant:

32-bit general registers

Is the shift amount, in the range 0 to 31, defaulting to 0.

64-bit general registers

Is the shift amount, in the range 0 to 63, defaulting to 0.

Xd

Is the 64-bit name of the general-purpose destination register, in the range 0 to 31.

Xm

Is the 64-bit name of the general-purpose source register, in the range 0 to 31.

shift

Is the optional shift type to be applied to the second source operand, defaulting to LSL, and can be one of LSL, LSR, or ASR.

Was this page helpful? Yes No