You copied the Doc URL to your clipboard.

VE_SysRegs - ports

This section describes the ports.

Table 7-13 VE_SysRegs ports

Name Protocol Type Description
cb[0-1] VECBProtocol Master The Configuration Bus (CB) controls the power and reset sequence.
clk_24Mhz ClockSignal Slave Reference clock for internal counter register.
clk_100Hz ClockSignal Slave Reference clock for internal counter register.
clock_CLCD ClockRate Control Master The clock for the LCD controller.
lcd LCD Master Multimedia bus interface output to the LCD.
leds ValueState Master Displays state of the SYS_LED register using the eight colored LEDs on the status bar.
mmb[0-2] LCD Slave Multimedia bus interface input.
mmc_card_present StateSignal Slave Indicates the presence of a MultiMedia Card (MMC) image.
pvbus PVBus Slave Slave port for connection to PV bus master/decoder.
system_reset Signal Master Signal to the platform a complete system reset. Writes to the System Configuration registers can trigger the reset signal.
user_switches ValueState Master Provides state for the eight User DIP switches on the left side of the CLCD status bar, equivalent to switch S6 on VE hardware.
Was this page helpful? Yes No