You copied the Doc URL to your clipboard.

DP650 component

This section describes the DP650 component.

DP650 - about

This component is a model of the DP650 Display Processor. Connect it to a visualization component to view LCD output. This is the single display configuration of DP650. For the dual display configuration, use DP650x2.

The model has the following limitations:

  • No support for the polyphase scaling algorithm, it always uses nearest neighbor.
  • No support for 3D or interlaced video.
  • No support for image enhancing functionality.
  • No YUV 2-plane support for memory writeback.
  • No color space conversion support.

DP650 - ports

This section describes the ports.

Table 4-66 DP650 ports

Name Protocol Type Description
clk_in ClockSignal Slave Master clock input, typically 24MHz, to drive pixel clock timing.
display LCD Master Connection to visualization component.
intr Signal Master Interrupt signaling from display engine.
intr_se Signal Master Interrupt signaling from scaling engine.
pvbus_m PVBus Master DMA port for video data.
pvbus_s PVBus Slave Slave port for connection for APB access.
reset_signal Signal Slave Slave port for external reset line.

DP650 - parameters

This section describes the parameters.

Table 4-67 DP650 parameters

Name Type Allowed values Default value Description
disable_snooping_dma bool true, false false Disable DMA snooping.
dual_mode bool true, false false Whether two display mode is supported.
force_frame_rate int 0-60 0 If 0, the input clock is used as PXLCLOCK, if >0, the model ensures the screen display is refreshed n times per simulated second.
set_nprot_nsaid int - 0x201374360 Configurable NPROT_NSAID for non-secure NSAID values.
set_nprot_streamid int - 0x201374360 Configurable NPROT_STREAMID for non-secure STREAMID values.
set_prot_nsaid int - 0x67121680 Configurable PROT_NSAID for secure NSAID values.
set_prot_streamid int - 0x67121680 Configurable PROT_STREAMID for secure STREAMID values.

DP650 - registers

This component provides the registers that the Technical Reference Manual (TRM) specifies.