You copied the Doc URL to your clipboard.

Appendix A. Revisions

This appendix describes the technical changes between released issues of this book.

Table A.1. Issue A
ChangeLocationAffects

No changes, first release

--

Table A.2. Differences between issue A and issue B
ChangeLocationAffects
Note changed in Boot Monitor Configure command set table. The note in the SET CLOCK command is changed to state that the clock values are determined by the default values in the motherboard configuration file, board.txt.Table 1.5All versions

Table A.3. Differences between issue B and issue C
ChangeLocationAffects
VERIFY file1 file2 command added to Standard Boot Monitor command set.Table 1.3All versions

DCC number added to Boot Monitor Configure command set in the following commands:

  • DISPLAY CLOCK

  • DISPLAY CURRENT

  • DISPLAY SCC

  • DISPLAY TEMPERATURE

  • DISPLAY VOLTAGE

  • SET CLOCK

  • SET SCC

Table 1.5All versions
LINUX image name [file name] added to Boot Monitor NOR flash command set.Table 1.7Issue C

Table A.4. Differences between issue C and issue D
ChangeLocationAffects
Document updated to latest Element Definition Document (EDD).All document All versions

LINUX commands added:

  • LINUX image name [command line information]

  • LINUX image name [FILE] [file name]

  • DISPLAY POWER [site name] [POSITION number] [DCC number] [DEVICE device]

  • LINUX image name [command line information]

  • LINUX image name [FILE] [file name]

Table 1.3

Table 1.3

Table 1.5

Table 1.7

Table 1.7

All versions

Table A.5. Differences between issue D and issue E
ChangeLocationAffects
DISPLAY ENERGY and RESET ENERGY commands added.Table 1.5All versions

Linux commands changed. Previous Linux commands replaced with the following:

LINUX BOOT image name LOAD_ADDRESS address [ENTRY_POINT address] [kernel command line]
LINUX BOOT image name LOAD_ADDRESS address [ENTRY_POINT address] [FILE file name]
LINUX INITRD image name LOAD_ADDRESS address
LINUX FDT image name LOAD_ADDRESS address

Table 1.3

All versions

Linux commands changed. Previous Linux commands replaced with the following:

LINUX BOOT image name [LOAD_ADDRESS address] [ENTRY_POINT address] [kernel command line]
LINUX BOOT image name [LOAD_ADDRESS address] [ENTRY_POINT address] [FILE file name]
LINUX INITRD image name [LOAD_ADDRESS address]
LINUX FDT image name [LOAD_ADDRESS address]

Table 1.7

All versions

Table A.6. Differences between issue E and issue F
ChangeLocationAffects
Updated CLEAR BOOTSCRIPT and SET BOOTSCRIPT commands.Table 1.3All versions
Added REBOOT, RESET and SHUTDOWN commands.

Table 1.3

Table 1.4

Table 1.6

Table 1.7

All versions

Removed Glossary.

Added explanations of abbreviations used in document.

Throughout document

All versions

Was this page helpful? Yes No